Hardfacing Groups

EL KADESIA HF 150

EL KADESIA HF 150

It is suited for highly abrasion resistant claddings on parts subject to extreme sliding mineral abrasion, also at elevated temperatures up to 500° C. The extremely high abrasion resistance is reached by the very high content of special carbides (Mo, V, W, Nb).

EL KADESIA HF 150

EL KADESIA HF 100

EL KADESIA HF 100

Rutile-basic coated hardfacing stick electrode for high abrasion and medium impact Recovery 160 %. It is suited for highly wear resistant claddings on parts subject to strong grinding abrasion combined with medium impact,

EL KADESIA HF 100

EL KADESIA HF 90

EL KADESIA HF 90

It is suitable for claddings on parts subject to highest pressure and shock in combination with abrasion. Surfacing can be made on ferritic steels as well as austenitic hard Mn-steels and joints of hard Mn-steels can be welded.

EL KADESIA HF 90

EL KADESIA HF 85

EL KADESIA HF 85

It is suitable for cladding structural parts subject to abrasion combined with impact. The main applications are tools in the earth moving industry and crushing plants as well as cold and hot working tools

EL KADESIA HF 85

EL KADESIA HF 80

EL KADESIA HF 80

Martensitic microstructure with good resistance to abrasion, impact and compression. Applicable for cladding parts of steels

EL KADESIA HF 80

EL KADESIA HF 75

EL KADESIA HF 75

basic-covered electrode for depositing wear resisting overlays on structural members subjected to severe abrasive wear.

EL KADESIA HF 75

EL KADESIA HF 70

EL KADESIA HF 70

Good abrasion resistance and multi-layer build up ability. Particularly suited for wear resistant surfacing on Mn-Cr-V alloyed parts,

EL KADESIA HF 70

EL KADESIA HF 60

EL KADESIA HF 60

It is indicated for medium-hard surfacings, particularly on structural parts of base materials of higher strength, such as Mn-Mo-alloyed wing and junction rails up to 850 N/mm², e. g. drive wheels, gear parts, crane wheels etc.

EL KADESIA HF 60